September 19, 2019 by Boris Brezillon | News & Events
Linux 5.3 was released over the weekend, which means it's time for our usual "where does Collabora stand in this picture?" tour. As has been the case for several years now, Collabora continues being an active contributor to the Linux kernel.
September 12, 2019 by Mark Filion | News & Events
Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset.
September 06, 2019 by Joey Ferwerda | News & Events
With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear.
August 28, 2019 by Gert Wollny | Blog
With the release of virglrenderer 0.8.0, getting accelerated OpenGL within a virtual machine (VM) made a big leap forward. Since virglrenderer-0.7.0, the code base has seen ~600 commits, and Collabora provided more than 80% of these contributions.
August 20, 2019 by Mark Filion | News & Events
Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.
August 06, 2019 by Rohan Garg | Blog
Ongoing work on the reverse-engineered Panfrost OpenGL ES driver for Arm Mali GPUs has turned the RK3399 SoC into a very attractive platform to try out Wayland on ARM devices.
August 02, 2019 by Ryan Pavlik | Blog
As part of its unwavering commitment to open source and open standards, Collabora is proud to be part of bringing the recently-released OpenXR 1.0 to life, and to be pioneering the Monado open source runtime for OpenXR.
August 02, 2019 by Mark Filion | News & Events
This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level.
July 30, 2019 by Lubosz Sarnecki | News & Events
Today, we are very excited to announce xrdesktop, a new open source project sponsored by Valve, enabling interaction with traditional Linux desktop environments, such as GNOME and KDE, in VR.
July 25, 2019 by Erik Faye-Lund | Blog
There's been quite a few updates to Zink, an OpenGL implementation on top of Vulkan, since I last wrote about it. Here's an overview of the recent changes, as well as an exciting announcement!
July 25, 2019 by Andrej Shadura | News & Events
With DebConf19, the annual conference for Debian contributors and users, in full swing this week in Curitiba, Brazil, what better time to look at the contributions made by Collaborans to the latest Debian release!
July 18, 2019 by Nicolas Dufresne | Blog
A little over a month and a half ago, Collaborans including Aaron Boxer, George Kiagiadakis, Guillaume Desmottes, Stéphane Cerveau and myself took part in the GStreamer Spring Hackfest in Oslo. This year, the hackfest was kindly hosted by Pexip.
August 21, 2020 by Antonio Caggiano | Blog
We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!
August 20, 2020 by Antonio Ospite | Blog
Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
July 09, 2020 by Louis-Francis Ratté-Boulianne | Blog
Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.
June 26, 2020 by Ricardo Cañuelo Navarro | Blog
Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
June 12, 2020 by Stéphane Cerveau | Blog
Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.
June 05, 2020 by Alyssa Rosenzweig | Blog
With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.
May 27, 2020 by Adrian Ratiu | Blog
Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.
May 15, 2020 by Stéphane Cerveau | Blog
gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.
November 27, 2024 by Marius Vlad | News & Events
Recently (test), both Weston 14.0, and 14.0.1 (bug fix) were released. Here's at look at some of the highlights and changes for this latest release of Wayland's reference compositor.
November 26, 2024 by Dmitry Osipenko | News & Events
Linux kernel 6.12 is here with real-time preemption support and an extensible scheduler class. Take a look at the contributions our kernel team made for this release.
November 15, 2024 by Kara Bembridge | News & Events
The Linux Foundation Member Summit is an opportune time to gather on the state of open source. Our talk will address the concerns and challenges of maintaining a stable kernel.
November 14, 2024 by Mark Filion | News & Events
Today, we are delighted to announce a growing collaboration with MediaTek which will enable Collabora to introduce, improve, and maintain MediaTek's IoT Edge AI Genio platforms upstream.
November 06, 2024 by Mark Filion | News & Events
Join us at electronica 2024! In partnership with Renesas, Collabora will be showcasing GStreamer open source AI video analytics on the Renesas RZ/G2L, leveraging the MYIR RemiPi.
October 07, 2024 by Kara Bembridge | News & Events
XDC kicks off October 9 and we have 7 talks to share with the community! Join us as we share the latest news on open source graphics.
October 03, 2024 by Kara Bembridge | News & Events
For the first time in over a decade, the GStreamer Conference will be taking place in North America, and we're prepped and ready with no less than 10 talks to share! Catch the latest developments and AI advancements for this multimedia framework.
September 19, 2024 by Shreeya Patel | News & Events
The latest 6.11 kernel release is here! This release improves performance, security, and hardware compatibility, increasing the kernel's flexibility and efficiency for various computing environments.
September 18, 2024 by Erik Faye-Lund | News & Events
It is now possible to start kicking the tires on Vulkan with an open source driver on Arm Mali-G610 and Mali-G310 GPUs. The Panfrost project continues to grow!
September 16, 2024 by Kara Bembridge | News & Events
Collabora will be in Vienna for the Media Summit, Open Source Summit Europe, and Linux Plumbers! Catch one of our many talks.
September 13, 2024 by Kara Bembridge | News & Events
As guests at the STMicroelectronics booth, Collabora will be demonstrating how the STM32MP2 chip is perfectly suited for enabling edge AI solutions in industrial environments.
August 29, 2024 by Kara Bembridge | News & Events
Collabora is headed to Amsterdam for IBC! Drop by to see our work on the DAB protocol, our integration of LCEVC, and our latest XR project, ElectricMaple.
Here are the events we'll be attending in the coming weeks – come say hello!
November 19-21, Napa, CA, USA
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português