July 26, 2018 by Mark Filion | News & Events
Collabora is heading East to sponsor & attend DebConf18, the annual Debian conference! The week-long event takes place for the first time in Asia, at the National Chiao Tung University Microelectronics & Information Research Center, in Hsinchu Taiwan.
July 04, 2018 by Arnaud Rebillout | Blog
Last week, a new version of docker.io, the Docker package provided by Debian, was uploaded to Debian Unstable. Quickly afterwards, the package moved to Debian Testing, the first time in two years that docker.io has migrated to "testing".
June 29, 2018 by Mark Filion | News & Events
By this time next week, Collaborans will have arrived in Almería, Spain, to attend and speak at the 2018 edition of GUADEC, the annual GNOME conference. Come say hello!
June 27, 2018 by Ana Guerrero López | Blog
In Debian and derivative systems, there are many ways to build images. The simplest tool of choice is often debootstrap. It works by downloading the .deb files from a mirror and unpacking them into a directory which can eventually be chrooted into.
June 25, 2018 by Olivier Crête | Blog
Launched by Haivision in 2017, and freely available on GitHub via the Mozilla Public License 2.0, SRT is an innovative UDP-based protocol enabling high-quality, low-latency video streaming across unpredictable networks.
June 11, 2018 by Omar Akkila | Blog
Embedded devices are a popular deployment target for GStreamer yet they are not tested on the project's Continuous Integration (CI) system. Here's a look at work done to introduce a Raspberry Pi for automated on-board testing using Jenkins, LAVA & more.
June 05, 2018 by Mark Filion | Blog
In late January 1998, Netscape surprised everyone by releasing the source for Communicator, its web browser, making it readily available to all. The marked a turning point, and the birth of a new term, in software development: Open Source.
June 04, 2018 by Enric Balletbò i Serra | News & Events
Linus Torvalds has now released the official Linux 4.17, so it’s time for our traditional blog post summing up our contributions to the latest version of the Linux kernel, which include a number of patches to the DRM subsystem.
May 29, 2018 by Omar Akkila | Blog
At the start of 2018 in January, I joined Collabora, an open source software consultancy, as a Software Engineer Intern with the Multimedia team. Reaching the end of that internship, I would like to take the time to share my experience.
May 18, 2018 by Zeeshan Ali | Blog
Earlier this month, Olivier Crête, Nicolas Dufresne, George Kiagiadakis & I attended the GStreamer Spring Hackfest in Lund, Sweden. Hosted by Axis, it was a great opportunity for the GStreamer community to touch base and work on open bugs and pet projects.
May 09, 2018 by Elie Tournier | Blog
A few months ago, Robert Foss wrote a blog post about virtualizing GPU Access. Here's a look at some of the major improvements that have landed upstream since then, including QEMU using OpenGL ES acceleration, as well as our plans for the future.
May 01, 2018 by Olivier Crête | Blog
Generously hosted by Axis in the beautiful Lund, Sweden, the annual spring hackfest is an occasion for the community to get together to bond, but also to co-ordinate the next half year of development of the GStreamer multimedia framework.
August 21, 2020 by Antonio Caggiano | Blog
We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!
August 20, 2020 by Antonio Ospite | Blog
Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
July 09, 2020 by Louis-Francis Ratté-Boulianne | Blog
Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.
June 26, 2020 by Ricardo Cañuelo Navarro | Blog
Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
June 12, 2020 by Stéphane Cerveau | Blog
Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.
June 05, 2020 by Alyssa Rosenzweig | Blog
With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.
May 27, 2020 by Adrian Ratiu | Blog
Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.
May 15, 2020 by Stéphane Cerveau | Blog
gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.
October 13, 2015 by Guy Lunardi | News and Events
Seoul, South Korea - From 20/10/2015 to 23/10/2015: We will be exhibiting at the GENIVI Showcase during the All Member Meeting.
September 28, 2015 by Guy Lunardi | News and Events
Dublin, Ireland - from 08/10/2015 to 09/10/2015: The GStreamer Conference is a conference for anyone interested in the GStreamer multimedia framework or Open Source and cross-platform multimedia.
September 05, 2015 by Guy Lunardi | News and Events
Amsterdam, The Netherlands - from 10/09/2015 to 15/09/2015: we are thrilled to be joining ARM to demonstrate our latest technology showcases together at their booth at IBC 2015. Booth Hall 4.C61
August 14, 2015 by Guy Lunardi | News and Events
Seattle, USA - from 19/08/2015 to 21/08/2015: The Linux Plumbers Conference (LPC) is a developer conference for those working on the “plumbing” of Linux.
August 14, 2015 by Guy Lunardi | News and Events
Heidelberg, Germany - from 15/08/2015 to 22/08/2015: The 16th annual Debian developers meeting.
August 14, 2015 by Guy Lunardi | News and Events
Montpellier, France - from 14/08/2015 to 16/08/2015: GStreamer developers are meeting up to work on the project.
March 20, 2015 by Guy Lunardi | News and Events
Orlando, USA - from 17/06/2015 to 19/06/2015: we'll be exhibiting at InfoComm 2015, the largest event for professional AV in the world. Collabora booth 5469
March 18, 2015 by Guy Lunardi | News and Events
Stuttgart, Germany - From 22/04/2015 to 22/04/2015: We will be exhibiting at the GENIVI Demonstration Showcase during the All Member Meeting.
January 15, 2015 by Guy Lunardi | News and Events
Amsterdam, The Netherlands February 10-12, 2015: the world’s largest tradeshow dedicated to professional AV and electronic systems integration. Collabora booth #11-E61
December 17, 2014 by Guy Lunardi | News and Events
Las Vegas, USA - January 6th - 9th, 2015: Collabora will be participating with key partners at CES 2015, the world’s gathering place for all who thrive on the business of consumer technologies.
December 16, 2014 by Guy Lunardi | News and Events
Cambridge, UK January 25-29, 2015: Hosted at Collabora's UK headquarters, the Event Developer Hackfest 2015 aims to continue the tradition of pushing forward roadmaps for the toolkit and developer experience.
November 24, 2014 by Guy Lunardi | News and Events
A Coruña, Spain - December 7-10, 2014: Collabora are pleased to be sponsoring and attending the upcoming Web Engines Hackfest, which will bring together members from all parts of the Web Platform community.
Here are the events we'll be attending in the coming weeks – come say hello!
November 19-21, Napa, CA, USA
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português